Quickly perform dental handpiece maintenance (cleaning and lubrication) for up to 4 handpieces at a time with the
Lubricare 2. Its clean air-blow system ensures thorough cleaning and lubrication inside your handpieces and consistent, repeatable high standards without the variability that may occur during manual lubrication.
Clean a turbine in approximately 20 seconds and a contra-angle handpiece in 40 seconds with preprogrammed operating modes that enable automatic maintenance.
Achieve best cleaning and lubrication outcomes with separate dispensing of cleaner and lubricant for more precise application than systems that dispense the solutions together.
Reduce maintenance oil consumption by up to 4 times compared to manual maintenance procedures.
|Compatibility||E-type attachments (additional couplings may be required)|
|Cycle Duration||20 s turbine, 40 s contra angle|
|Capacity||4 handpiece lanes (2 cleaning, 2 lubricating) and 1 chuck lane|
|Rating||AC 100 V–240 V|
|Power Consumption||10 VA–25 VA|
|Air Flow Rate||60 NL/min–100 NL/min (0.3 MPa–0.5 MPa)|
|Air Pressure||43.5 psi–72.5 psi (0.3 MPa–0.5 MPa) [58 psi (0.4 MPa) recommended]|
|Weight||Approx. 17 lb (8 kg)|
|Outer Dimensions||11.81" L x 11.81" W x 14.37" H|
(300 mm x 300 mm x 365 mm)
Use Spraynet® and Lubrifluid® for cleaning and lubrication to give your instruments impeccable hygiene and unrivalled service life. Spraynet cleaning solution is proven to reduce 99.99% of the microbial load.
Spraynet® 002-10783-00 (Box of 6 16.9 oz cans)
Lubrifluid® 002-10782-00 (Box of 6 16.9 oz cans)