CONTACT A SALES REP

Modular 2-story Double-Deck Kennels

If you’re limited on floor space within your facility, maximize capacity by expanding vertically. Modular 2-Story Double-Deck™ Kennels let you create a second level of boarding runs that maintain full walk-in access for dogs and staff. Designed for flexibility, these kennels fit a wide range of building dimensions and include features to streamline operations

  • Fits rooms as narrow as 18′ wide with a minimum interior headroom of 14′.
  • Includes built-in plumbing and drainage systems for the upper level and aisles.
  • Stairways can be placed in various locations to suit your layout.
  • Offers back-to-back or single-row configurations with configurable side panels, gates, and accessories.
  • Configured Options

    Panels

    • FRP (fiberglass reinforced plastic)
    • Wilsonart®
    • Stainless steel

    Gates

    • Wire grid
    • Tempered glass
    • FRP (fiberglass reinforced plastic)
    • Wilsonart

    Wilsonart is a registered trademark of Wilsonart, LLC.

    • FRP Colors
      • Yellow - 334
      • Beige - 878
      • Sage - 255
      • Red - 132
      • Pearl - 671
      • Orange - 131
      • Sky - 245
      • White - 50
      • Blue - 875
      • Taupe - 6107
      • Jade - 484
      • Almond - 698
      • Wilsonart is a registered trademark of Wilsonart, LLC
    • Wilsonart® High Pressure Laminate
      • Amber Cherry - 7919
      • Old Mill Oak - 7973
      • Asian Sand - 7952
      • Sterling Ash - Y0491
      • Milano Quartz - 4726
      • Calcutta Marble - 4925
      • Pebble Piazza - 5009
  • Technical Specifications

    Spec Sheet

    BUILDING REQUIREMENTS

    • Ceiling height: Must be 14’ or more (standard headroom).
    • Room width: 12’ minimum (single row system); 20’ minimum (back-to-back system).
    • Double-Deck stairways can be positioned in various locations. (Stairways to be provided by a separate manufacturer or contractor.)
    • Double-Deck Kennels products are designed by requirement and engineered to order.

    KENNELS

    Standard Features:

    • Sani-Kennel™ System on first floor runs.
    • Transfer door available on back panel between back-to-back runs.
    • UltraBase™ built-in floor drain on upper-level runs.
    • Complete plumbing and drainage system for upper-level runs and aisles. (Connection to local service provided by local contractor.)

    Sizes: Single Row

    • First-floor Runs:
      • Length: 8’-10’
      • Width: 3’ or 4’
    • Upper-level Runs:
      • Length: 4’-6’ (based on lower-level dimensions)
      • Width: 3’ or 4’
    • Upper Aisles:
      • Width: 4’
    • Stairways:
      • Width: 4’ minimum (provided by separate manufacturer)

    Sizes: Back-to-back

    • First-floor Runs:
      • Length: 6’-8’
      • Width: 3’ or 4’
    • Upper-level Runs:
      • Length: 4’-6’ (based on lower-level dimensions)
      • Width: 3’ or 4’
    • Upper Aisles:
      • Width: 4’
    • Stairways:
      • Width: 4’ minimum (provided by separate manufacturer)

    GATES

    Materials:

    • 1” square 18-gauge 304 stainless steel tube construction.
    • Midmark patented stainless steel two-way latch.
    • Gate and sidelight material options:
      • Wire grid: 3/16” diameter, 304 stainless-steel; 15/16” spacing between vertical wires; 3-5/8” spacing between horizontal wires; welded intersections.
      • Glass panel: 1/4” tempered glass with aluminum edge protection.
      • FRP (fiberglass reinforced plastic): bonded on the exterior side of a polypropylene fluted core with aluminum edge protection. Interior side material is 24-gauge stainless steel.
      • Wilsonart®: high-pressure laminate bonded on the exterior side of a polypropylene fluted core with aluminum edge protection. Interior side material is 24-gauge stainless steel.

    Sizes:

    • Measured by run width; available in 2 increments, 36” and 48” wide.

    PANELS

    Materials:

    • ¾” aluminum framework.
    • Upper material infill: 1/2” thick bone-colored polypropylene grid.
    • Lower material infill:
      • FRP (fiberglass reinforced plastic): bonded on each side of a polypropylene fluted core.
      • Wilsonart®: high-pressure laminate bonded on each side of a polypropylene fluted core.
      • 24-gauge stainless steel bonded on each side of a polypropylene fluted core.
  • Accessories

    BOWL SYSTEMS

    • Built-in Single- and Double-Bowl Brackets
      • 2 ¾ Quart
    • Rotary Double Bowl Insert
      • 1 Quart

    LATCHES

    • Patented Stainless Steel Two-Way Latch

    RAISED FLOORING

    • Plastisol Coated Steel-Core: Blue
    • Fiberglass Composite

    REST BENCHES

    • Freestanding or Swing-up Styles

    Materials:

    • Frame: Aluminum
    • Benches: Stainless Steel or FRP

    TOP COVERS

    • Welded Wire

    TRANSFER DOORS

    • Standard Wall-Mounted Doors
    • Cable Guard Wall-Mounted Doors
    • Fiberglass Insulated Doors
    • Panel-Mounted Doors
    • Pickwick™ Dog-Operated Doors
    • Locking Transfer Doors

    ADDITIONAL ACCESSORIES

    • Aluminum Gutter Covers
    • Bone-Shaped Weight Assist Handle
    • Card Holders
    • Feeders
    • Nelson® Automatic Waterer
  • Resources

  • Support